Table of Contents
Advertisement
Quick Links
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
Follow warnings on all products in a crib .
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Please note that the warning sticker is placed on the cribs to keep
parents and caregivers informed it is a requirement by law under
CPSC and ASTM.We do apologize for any inconvenience this may
cause you.
Assembly INSTRUCTIONS
s
1
ITEM NO: 662
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dream On Me 662
Summary of Contents for Dream On Me 662
- Page 1 Dream On Me Inc. ASSEMBLY INSTRUCTIONS 1532 S WASHINGTON AVE ITEM NO: 662 PISCATAWAY TWP NJ 08854 OFFICE: 732-752-7220 CUSTOMER SERVICE: 732-366-1788 Follow warnings on all products in a crib . Adult assembly required. Small parts may present choking hazard prior to assembly.
- Page 3 . Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. Contact DREAM ON ME for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use.
- Page 5 b:1-9/16” Allen head bolt (16 pcs) a:3” Allen head bolt (8 pcs) c:3/4” Allen head bolt (4 pcs) d:1-9/16” Wood dowels (14pcs) e:Barrel nuts (8 pcs) f:Cams (10 pcs) g:Cam bolts (10 pcs) Allen wrench supplied PHILLIPS--HEAD SCREWDRIVER REQUIRED FOR ASSEMBLY ----NOT INCLUDE...
- Page 6 B.Rear Left Leg (1pc) C.Rear Right Leg (1pc) D.Left Side Panel (1pc) A.Headboard (1pc) E.Right Side Panel (1pc) F.Front Left Leg (1pc) G.Front Right Leg (1pc) H.Top Rail (2pcs) J.Front Panel (1pc) L.Mattress Support Frame (1pc) K:The bottom bar (1pc) M.Drawer Front (1pc) N.Drawer Rear (1pc) P.Drawer Left (1pc)
- Page 7 STEP 1 Drawer Assembly Steps: Attach 2pcs wood dowels (d) into bottom holes of Drawer Divider (S). Screw 10pcs Cam Bolts (g) into white inserts of parts (M, N,P,Q). Align Drawer parts (N,Q,S,P). (Pictures are rear views of drawer) STEP 2 Insert 4pcs of Cams (f) to Rear (N), insert 1pc of Cam (f) to Divider (S), then use screwdriver (not provided) to rotate clockwise 1/4 turn to lock the 5 Cam Bolts (g).
- Page 8 STEP 3 Align parts (M,Q,S,P). Insert 4 pcs of Cams (f) to (Q,P),insert 1pc of Cam (f) to Divider (S), then use screwdriver (not provided) to rotate clockwise 1/4 turn to lock the 5pcs of Cam Bolts (g). (Pictures are rear views of drawer) STEP 4 Drawer complete.
- Page 9 Left Side Right Side STEP 6 Insert 2pcs W ood Dowels (d) into side hole s of Headboard (A) then align Left and Right Side Panels to Headboard (A). Insert 4pcs Barrel Nuts (e) and thread 4pcs Allen Head Bolts (a) through rear Legs (B, C) to Headboard (A).
- Page 10 STEP 7 STEP 8 Attach Mattress Support Frame (L) with 4pcs Allen Head Bolts (c) to brackets on 4 legs. FACE UP Make sure the Warning Envelope is installed Check components periodically, make sure hinges are tightened properly and securely. Complete Crib with Drawer...
- Page 11 Converting crib to a toddler bed (toddler rail and converting bolts are sold separately) WARNING FOR TODDLER BED USE ！ Failure to follow these warning and the assembly instructions could result in serious injury or death from entrapment or strangulation. DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
- Page 12 Converting crib to a day bed You have the option to convert crib to a day bed 1.Remove The front panel(J). 2.Install the mattress support (L) in its lowest position . 3.Assemble the bottom bar (K) to the front left Leg(F) and the front right leg(G) by Allen head bolts(a),Barrel nuts(e) and wood dowels.
- Page 13 (Hollywood bed frame sold separately) RAIL LEFT FOOT PLATFORM RIGHT FOOT PLATFORM POST x 1 POST x 1 POST x 1 NOT INCLUDED NOT INCLUDED NOT INCLUDED Converting kit is sold separately You have the option to convert crib to a full size bed II 1:Use the back rail as the headboard of full size bed.
- Page 14 LIMITED WARRANTY Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
Need help?
Do you have a question about the 662 and is the answer not in the manual?
Questions and answers