Advanced Setting - ALC AWFB15 Installation And Operating Instructions Manual

ADVANCED SETTING

This chapter explains the advanced settings for administrator. Administrator is the one who owns
the administration password and has the full control to the WAPP camera. The administrator can
access all WAPP functions and settings, while general users can receive the surveillance images
for live view/screen capture/video recording and may not manage the camera settings.
Admin Password
Device Security Code
Cloud Setting
WiFi
Notify Enable
Motion Detect
LED Light
SDCard Overwrite
Brightness
Power Saving Timer
Device Information
Data Format
Video Record Time
Record Mode
Video Framerate
Video Resolution
Note:
It may take a few minutes for some routers to update the registered camera. When you
complete advanced settings and return to device list, please wait for a while allowing your
router to transfer the new setting(s) to the camera.
The security code required to enter Advanced Setting for system setting
management.
Setup/Change the password of the particular camera required for
remote access.
Enter to (A) setup cloud storage service if you have not done so. The in-
app wizard will take you through step by step to complete the setup, (B)
Edit account password and (C) manage device.
Manage the Wi-Fi network setting (available for Android verison app).
Activate/Deactivate push notification function for the particular camera
and entire registered users.
Activate/Deactivate the motion detection function for the particular
camera.
Activate/Deactivate the white LED (for night view) function for the
particular camera.
Activate/Deactivate the data storage overwrite function for the particular
camera.
Adjust the brightness level of the particular camera.
Adjust the power saving timer setting of the particular camera.
Access to view camera and app firmware versions.
Format the memory card inserted in the camera - all data will be erased.
Setup the length of video record when camera detects motion.
Select capture snapshots or videos when camera detects motion.
Setup the number of frame per second for the video record.
Setup the video resolution for the video record.
21