Port Configuration - Planet WSW-2401 User Manual

3.5-1-4 Password Configuration
Allow user to modify the password
Ø
Select the <Edit>
Ø
Old password: enter the old password
Ø :
New password
Ø
Enter again: re-enter the new password again
Ø
Press<Save>to save the configuration

3.5-2 Port configuration

In this function, user can setup every port status.
Ø
Select <Edit>
Ø
Use TAB /Backspace key to move between items
Ø
State: The port can be set enable or disable mode. If the port status is in disable then this
port will not receive or transmit any packet.
Ø
Negotiation: set the negotiation status of port. The port can be set auto or force mode.
Ø
Speed/Duplex: set the port link speed and duplex mode
Ø
FC: enable or disable flow control function (flow control for full duplex mode)
Ø
BP: enable or disable back pressure function (back pressure for half duplex mode)
Ø
Bandwidth In/Out: per port packet transmission rate control. Per level is 100Kbps.
Ø
Priority: set port to high or low priority
Ø
Security: enable or disable security function
enter the new password
13