Spanning Tree - Planet WSW-2401 User Manual

port
Ø
Ingress Filtering: Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN. The user allow to enable or disable this
function
Ø
Acceptable Frame Type: allow user to select different frame type which is All or Tag
only
Ø
Click Apply after setup complete

4.4-8 Spanning Tree

The Spanning-Tree Protocol (STP) is a standardized method (IEEE 802.1d) for avoiding loops
in switched networks. When STP enabled, to ensure that only one path at a time is active
between any two nodes on the network. We are recommended that you enable STP on all
switches ensures a single active path on the network
4.4-8-1 System Configuration
Ø
You can modify new value for STP state, then click Apply button to modify
Ø
You can view the Spanning tree information about Root Bridge
Parameter
Priority Allow changing priority value. The priority range is 1 to 65535
Max Age, Allow changing the Max Age value. The Max Age range is 6 to 40
Hello Time Allow changing the Hello Time. The Hello Time range is 1 to 10.
Forward Delay Allow changing the forward delay time. The Forward Delay Time range is 4 to
Time 30.
Description
45