Planet WSW-2401 User Manual page 9

Off
Orange
FDX/COL
Blinks
Off
10/100Mbps Ethernet ports
There are 24 10/100Mbps R-J45 ports with 1 slot for 1 or 2-port 100Base-FX fiber module.
The RJ-45 ports are auto sense for 10Base-T or 100Base-TX connection and supports
MDI/MDIX automatically crossover capability, which means the user, is able to connect to
another switch or workstation without change the crossover cable.
Media
10/100Mbps RJ-45
ports
100Base-FX Module (Optional)
The optional module is 1 or 2 port 100Base-FX fiber module
Media
WSW-1SC,
WSW-1ST
WSW-2SC
WSW-2ST
Figure 2-3 WSW-1S Module
Console ports
The RS-232 console port is an interface that directly connects to the PC. When the
connection between the PC and switch is ready, run the Hyper Terminal and configure its
communication parameters. The operating mode of the console port is:
Ø
Baud rate: 9600
Ø
Data bits: 8
Ø
Parity: none
Ø
Stop bits: 1
No device attached.
The port is operating in Full-duplex mode.
Collision of Packets occurs in the port.
The operating in half-duplex mode
Speed Wiring
10Mbps Category 3,4,5 UTP/STP
100Mbps Category 5 UTP/STP
Speed Wiring
100Mbps multi-mode fiber optic
Figure2-4 WSW-2S Module
4
Maximum Distance
100m
100m
Maximum Distance
2km