Table of Contents
Advertisement
CONTROL PANEL OPERATION
TURNING THE APPLIANCE ON AND OFF
Insert the plug in the socket. Two dashes appear on the display
indicating that the appliance is in stand-by and the
keys light up.
Touch the
(C1) key to turn on the appliance.
When the appliance comes on, the last function set before it was
shut off is activated.
Note: If start-up is not continued, after a few minutes the
and
keys go off and the display light dims in order to reduce
energy consumption.
To turn the appliance off, touch the
plug.
NOTE: Never turn off the air conditioner by simply pulling the
plug. Touch the
key and wait a few minutes before pulling
the plug. In this manner, the appliance can perform the operat-
Perfect!
ing status checks.
Perfect!
FUNCTION
REAL FEEL is a De'Longhi technology that checks the relative hu-
midity and regulates the temperature at the same time. These
are the two most important elements for comfort.
Compare to traditional air conditioning, REAL FEEL maintains
comfort conditions over time, automatically modulating the
compressor and fan speed.
To activate the function, touch the
and
key and then pull the
key.
20
HIGH
MEDIUM
LOW
TEMPERATURE
The "REAL FEEL" status indicator (C9) changes colour as it ap-
proaches comfort conditions (see graph below).
ORANGE LIGHT:Environmental conditions
differ significantly from comfort conditions
GREEN LIGHT: Environmental conditions
satisfactory for most people, almost per-
fect.
Perfect!
BLUE LIGHT: Perfect environmental
conditions
Perfect!
•
Comfort is subjective. Consequently, different individuals
can judge the same environmental conditions differently.
•
In particularly severe environmental conditions (large
room size, high outdoor temperature or humidity, little
room insulation, many people or large thermal loads in the
room, exposure to the sun, etc.), the appliance may not be
able to reach comfort conditions.
AIR CONDITIONER MODE
This is ideal for hot and humid weather when the room needs to
be both cooled and dehumidified.
To correctly set this mode:
•
Touch the MODE key until the air conditioning symbol ap-
pears. The display will show the desired temperature.
•
To change the temperature to be reached, touch the + (C4)
key or the - (C5) key.
•
Select the desired fan speed by touching the
Operating curve
key.
Hide quick links:
Advertisement
Table of Contents
