Table of Contents
Advertisement
•
Open the window or French door slightly and set the outlet
B9 in place as shown in figure 7.
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
AIR CONDITIONING WITH INSTALLATION
If desired, your appliance can also be installed semi-permanent-
ly (Fig.8), following the distances shown in the figure.
min. 30 cm
In this case, the following steps are necessary:
•
Drill a hole (134 mm diam.) in an outside wall or through
the glass in a window. Follow the height (see fig. 11) and
sizes of the hole indicated in figure 9.
9
7
in the window
glass
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
Attach the flange accessory B1 provided to the hole.
•
Fit the adapter B3 in the air exhaust hose housing A7 on
•
the back of the appliance (see fig. 1).
8
Screw the wall mounting accessory B4 on the air exhaust
•
hose B2. If necessary, remove the other adapter B3 from
the air exhaust hose B2 by unscrewing it (fig. 10).
•
Screw the hose on the machine.
10
min. 30 cm
Fit the end of the hose B2 to the flange B1 as shown in fig.
•
11.
Whenever the hose B2 is not attached, the hole can be closed
using the cap for the flange B1.
18
in the wood
in the wall: we
base of the
r e c o m m e n d
French door
insulating
section of the wall
with a suitable
insulation material
1
2
the
Hide quick links:
Advertisement
Table of Contents
