Change The Oil In Thedrive Axle - Bomag BW 177 D-4 Operating Instructions Manual

Every 1000 operating hours
6.30 Change the oil in thedrive
axle
Danger
!
Danger of scalding when draining off hot oil!
Caution
!
Drain oil only at operating temperature.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Environment
Catch running out oil and dispose of environ-
mentally.
i
Note
On other axle versions drain and filler plugs are of
slightly different design. Perform the oil change ac-
cordingly.
Park the machine on level ground.
l
Fig. 173
Clean and unscrew all level inspection and
l
drain plugs (Fig. 173).
Drain and catch all oil.
l
Clean the drain plug and turn it back in with a
l
new seal ring.
110
Fig. 174
Fill in oil through the oil level inspection bores
l
(Fig. 174), until it has reached the bottom edge
of the bore.
i
Note
The second level inspection plug as at the back.
After filling in oil wait until the oil has evenly distrib-
uted inside the axle.
Retighten the filler and level inspection plug.
l
BOMAG BW 177 D-4