Table of Contents
Advertisement
back towards neutral. This relieves the hydraulic
system and reduces the load on the diesel engine.
Fig. 19
No. 9 = Rotary switch for vibration, amplitude
selection
Position left
= low amplitude, high frequency
Position "mid-
dle"
= Vibration off
Position right
= high amplitude, low frequency
Fig. 20
No. 10 = Rotary switch for speed range selec-
tion
Position "turtle" = Working speed
Position "rab-
bit"
= Transport speed
BW 177 D-4
Indicators and Controls
Fig. 21
No. 11 = Emergency stop switch
The engine will be shut down and the brake will
close.
Danger
!
Danger of accident!
Operate only in emergency situations during
operation, do not use as a service brake.
The machine should only be started again after
the danger, that caused the actuation of the
emergency stop switch, has been removed.
operate
= push the button completely
unlock
= turn the button clockwise and
to drive
= move the travel lever first to
For safety reasons the travel system of the ma-
chine will only be enabled after the travel lever has
been shifted back to braking position.
BOMAG
down, it will automatically lock
in end position.
release it.
braking position, then start the
engine and choose the travel
direction.
31
Hide quick links:
Advertisement
Table of Contents
