How To Show Track While Track Plotting Is Stopped; How To Connect Track After Restarting Plotting - Furuno GP-3700F Operator's Manual

2. To restart recording, press the PLOT INTVL key. The own ship mark changes
from
Note: Recording can also be stopped or restarted from the echo sounder display.
3.2.2

How to show track while track plotting is stopped

You can show or hide own ship track on the plotter display while track plotting is
stopped.
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [DISP. STOPPED TRACKS] on page 1.
4. Select [SHOW] or [HIDE].
[SHOW]: The own ship track is
shown while track plotting is
stopped. The own ship track is not
recorded; the track is erased when it
goes off screen or when the power is
turned off. Also, the own ship track
whose plotting is stopped is erased
when its plotting is restarted or when
the chart display is zoomed in or out,
as shown in the right figure.
[HIDE]: The own ship track is not dis-
played while track plotting is stopped.
5. Press the DISP key to close the menu.
3.2.3

How to connect track after restarting plotting

When you restart plotting of track, the points where the plotting was stopped and re-
started can be connected with a straight line.
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [PLOT STOPPED TRACKS] on page 1.
4. Select [DRAW TRACK LINE] or [NO
TRACK LINE].
[DRAW TRACK LINE]: Stopping and
restarting points are connected with
a straight line.
[NO TRACK LINE]: Stopping and re-
starting points are not connected.
5. Press the DISP key to close the
menu.
to .
[DISP. STOPPED TRACKS] is set to [SHOW].
Plotting stopped.
- Plotting restarted
- Display zoomed in or out
Track not plotted.
Plotting stopped.
Actual track (Track shown by
dashed lines not displayed.)
Plotting restarted.
Plotting stopped.
[NO TRACK LINE] is selected
Track points where track plotting
was stopped and restarted are
connected with a straight line.
Plotting restarted.
Plotting stopped.
[DRAW TRACK LINE] is selected
3. TRACK
Own ship
Own ship
Plotting restarted.
Own ship
Own ship
3-5