Table of Contents
Advertisement
9. OTHER FUNCTIONS
9.2.2
How to set range for plotter display
You can select the plotter display ranges you wish to use. After selecting the ranges
desired, change the range with the ZOOM IN or ZOOM OUT key to activate range set-
tings. Note that more than two range settings must be set to [ON].
1. Press the MENU key to open the main menu.
2. Select [8. PLOTTER DISPLAY SETTING].
3. Select [5. PLOTTER RANGE SETTING].
4. Select the range to change.
5. Select [ON] or [OFF].
6. Press the DISP key to close the menu.
9.3
[DISPLAY FORMAT] Menu
The [DISPLAY FORMAT] menu contains items for setting up the display.
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [1. DISPLAY FORMAT] which has six pages.
4. Select an item to change.
5. Select an option or set a value.
6. After setting all required items, press the DISP key to close the menu.
The description for each item is as shown below.
9-8
Page 1
Page 2
Advertisement
Table of Contents
Troubleshooting
