4.14.5 Ping
Use this screen to tell the switch to send a Ping request to a specified IP address. You can use this to check whether the
switch can communicate with a particular IP station. Once you click the Apply button, the switch will send n pings and the
results will be displayed below the configurable data.
The Ping Parameters includes the following fields: Table 4-29 Description of the Ping Parameters.
• Item
• Target IP Address
• Count
• Time Out (in secs)
After field the parameter and press "Apply" to execute the Ping function. The Ping result shows at the next table. As the
Figure 4-60 screen appears.
Figure 4-59 Ping function screen
Description
Enter the IP address of the station you want the switch to ping. The initial value is
blank. The IP Address you enter is not retained across a power cycle.
Number of echo requests to send
Timeout in milliseconds to wait for each reply.
Table 4-29 Description of the Ping Parameters
Figure 4-60 Ping Result screen
-66-