Rstp System Configuration - Planet GSW-1602SF User Manual

4.7.1 RSTP System Configuration

The "RSTP System Configuration" table allows configuring the spanning tree parameters.
The page includes the following fields: table 4-9 description of the RSTP System Configuration.
• Item
• RSTP Enabled
• System Priority -
• Hello Time
• Max Age
• Forward Delay
• Force version
Figure 4-25 RSTP System Configuration
Description
Enabled –Enabled the RSTP.
Disabled -Disable the RSTP.
Specifies the bridge priority value. When switches or bridges are running STP,
each is assigned a priority. After exchanging BPDUs, the switch with the lowest
priority value becomes the Root Bridge. The bridge priority value is provided in
increments of 4096 (4K increments). For example, 0, 4096, 8192, etc.
The default value is 32768.
Specifies the device Hello Time. The Hello Time indicates the amount of time in
seconds a root bridge waits between configuration messages.
Value Range : 1-10
The default is 2 seconds.
Specifies the device Maximum Age Time. The Maximum Age Time indicates the
amount of time in seconds a bridge waits before sending configuration messages.
Value Range : 6-40
The default max age is 20 seconds.
Specifies the device forward delay time. The Forward Delay Time indicates the
amount of time in seconds a bridge remains in a listening and learning state
before forwarding packets.
Value Range : 4-30
The default is 15 seconds.
Specifies the Force Protocol Version parameter for the switch. The options are
Normal and Compatible
Normal – Rapid STP (802.1w): Detects and uses of network topologies that
-33-