Tools; Reboot; Factory Reset - Planet GSW-1602SF User Manual

The MAC Address Table includes the following fields: Table 4-28 Description of the Static MAC Address.
• Item
• VID
• Ports
• Type
• MAC-Address

4.14 Tools

4.14.1 Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user has
to re-login the WEB interface about 20 seconds later. The Reboot screen in Figure 4-51 appears.

4.14.2 Factory Reset

The Factory Reset button can reset the GSW-1602SF/GSW-2404SF/GSW-2416SF back to the factory default mode. Be
aware that the entire configuration will be reset; expect the IP address of the GSW-1602SF/GSW-2404SF/GSW-2416SF.
Once the Factory Reset item is pressed, the screen in Figure 4-52 appears.
To reset the IP address to the default IP Address "192.168.0.100". Press the hardware reset button
at the front panel about 5 seconds. After the device be rebooted. You can login the management
Note
:
WEB interface within the same subnet of 192.168.0.xx.
Description
The VLAN ID attached to the MAC Address
Specifies the port numbers for which the table is queried.
Static - Static addresses are manually configured. Packets received with the
destinated MAC address mathch the port static MAC setting will be forward to the
specify port.
The MAC address listed in the current static address list.
Table 4-28 Description of the Static MAC Address
Figure 4-51 Reboot screen
Figure 4-52 Factory Reset screen
-61-