System; System Info - Planet GSW-1602SF User Manual

◆ MAC Address – Dynamic Address Table / Static MAC Address. Explain in section 4.13
◆ Tools – Reboot / Factory Reset / Firmware Update / Configuration Upload / Ping / Cable Diagnostic. Explain in
section 4.14
◆ Status – Port Statistics Overview / Port Statistics Detail / LACP Status / RSTP Status / IGMP Snooping Status /
Multicast Group Status. Explain in section 4.15

4.2 System

4.2.1 System Info

The System Info page provides information for the current device information. System Info page helps a switch manager
to identify the versions and IP subnet Address etc. The screen in Figure 4-2 appears.
The page includes the following fields; see the table 4-1 description of the system information.
• Item
• MAC Address
• S/W Version
• H/W Version
• Active IP Address
• Active Subnet Mask
• Active Gateway
• DHCP Server
• Lease Time left
Figure 4-2 System Information screen
Description
Specifies the device MAC address.
The current software version running on the device.
The current hardware version of the device
The current IP Address of the device. The IP Address could be manual assigned
or get via DHCP server.
The current IP Subnet Mask setting on the device.
The current Gateway of the device.
If the IP address is got and assigned via a DHCP server, the field shows the IP
Address of the DHCP server.
If the IP address of the device be assigned via a DHCP Server, a DHCP lease
time would be apply to the device too. The lease time left shows the left time if the
device didn't request the IP Address to the DHCP server, then the IP address will
be released.
Table 4-1 Description of the system information
-13-