Configuring Authorization With A Tacacs+ Server [Vi]; Setting User Authorization Permissions On The Tacacs+ Server [Vi] - Cyclades AlterPath ACS Command Reference Manual

config >

Configuring Authorization with a TACACS+ Server [vi]

Step 1 - Open /etc/tacplus.conf
Step 2 - Edit the service parameter to be raccess:
service=raccess

Setting User Authorization Permissions on the TACACS+ Server [vi]

The authorization for each user is defined on the TACACS+ server itself in the file
/etc/tacacs/tac_plus.cfg on the "Linux Fedora Core 3"
The location of this configuration file may be different on other Linux distributions.
Step 1 - On the TACACS+ server, open the file
/etc/tacacs/tac_plus.cfg.
Step 2 - Edit the following lines:
The text in bold type face is included as an example.
user = tomj{
}
Table 3-4: Parameters for Specifying User Authorization on a TACACS+ Server
Parameter
user =
<username>
AlterPath ACS Command Reference Guide
Authentication
savetoflash
name = "Tom Jones"
service = raccess {
port1 = LAB2/ttyS2
port2 = 192.168.0.1/ttyS1
port3 = CAS/ttyS1
port4 = 172.32.20.10/ttyS6
port5 = LAB1/ttyS7
port6 = Knuth/ttyS16
}
Description
Defines the username as specified on the ACS.
Example Value
tomj
75