Pslave.conf Dial-In Parameters - Cyclades AlterPath ACS Command Reference Manual

pslave.conf Dial-in parameters

The following parameters are unique to a Dial-in setup except where indicated.
Parameter
conf.pppd
all.netmask
all.ipno (CAS and
Dial-in)
all.initchat
all.autoppp
AlterPath ACS Command Reference Guide
Profile Configuration
Description
Location of the ppp daemon with
Radius.
It defines the network mask for the
serial port.
See description in CAS section.
Modem initialization string.
Note: This parameter is inactive by
default. To activate, uncomment the
parameter and set the desired value.
all.autoppp PPP options to auto-detect a
ppp session. The cb-script parameter
defines the file used for callback and
enables negotiation with the callback
server. Callback is available in
combination with Radius Server
authentication. When a registered user
calls the ACS , it will disconnect the
user, then call the user back. The
following three parameters must be
configured in the Radius Server:
attribute Service_type(6): Callback
Framed; attribute Framed_Protocol(7):
PPP; attribute Callback_Number(19):
the dial number (example: 50903300).
Note: This parameter is inactive by
default. To activate, uncomment the
parameter and set the desired value.
Table 8.4: Dial-in specific parameters for the pslave.conf
Factory Configuration
/usr/local/sbin/pppd
255.255.255.255
192.168.1.101+
null
null
311