Cyclades AlterPath ACS Command Reference Manual page 314

Profile Configuration
Parameter
all.web_WinEMS
all.xml_monitor
all.translation
sX.pmoutlet
s1.tty
Description
Defines whether or not management of Windows
Emergency Management Service is allowed from the
Web.
Note: This parameter is inactive by default. To activate,
uncomment the parameter and set the desired value.
A non-zero value activates XML monitoring. All XML
data received from the port is captured and sent to
syslog-ng with facility LOCAL<DB_facility> and
priority INFO. The format of the message is
"XML_MONITOR (ttySx) [data]". XML tags are sent
by Windows Server 2003 Emergency Management
Services during boot or crash. You can read more on
XML_MONITOR in:
/etc/syslog-ng/syslog-ng.conf
Note: This parameter is inactive by default. To activate,
uncomment the parameter and set the desired value.
Defines whether or not to perform translation of Fn-
keys (e.g. F8 key) from one terminal type to VT-UTF8.
Currently only translation from xterm to VT-UTF8 is
supported.
Note: This parameter is inactive by default. To activate,
uncomment the parameter and set the desired value.
sX indicates the serial port number to which the PM
hardware is connected. The pmoutlet part of the
parameter indicates the outlet # on the PM hardware
that manages the server/network equipment in question.
The device name for the port is set to the value given in
this parameter. If a device name is not provided for a
port, it will not function.
Note: This parameter is disable by default. To activate,
uncomment the parameter.
Table 8.1: /etc/portslave/pslave.conf common parameters
Factory Configuration
no
0
null
8
disabled
298