Cli Method - Authentication; To Configure The Authentication Type For The Serial Ports; To Configure User Access To The Serial Ports - Cyclades AlterPath ACS Command Reference Manual

CLI Method - Authentication

Follow the below procedures to:
•
Configure the authentication type for the ACS serial ports.
•
Configure user access to the serial ports.
•
Configure the authentication type for accessing the console of a connected device.
•
Configure an authentication server.

To configure the authentication type for the serial ports.

Step 1 - Open the CLI interface by issuing the command:
# CLI
Step 2 - Navigate to the following path.
cli>config physicalports access authtype [value]
For physicalports specify a port number, select a range, or enter "all". For example,
"physicalport 4", "physicalports 1-8", or "physicalports all".
Step 3 - To see the list of authentication types, from >authtypes
<Press tab to see list of possible values>
Authentication type "None" is not a valid option when the serial port is configured for Power
Management connection protocol. The system defaults to "Local" if no authentication type
is selected.

To configure user access to the serial ports

Step 1 - Open the CLI interface by issuing the command:
# CLI
Step 2 - Navigate to the following path.
cli>config security
This menu lets you execute the following actions:
AlterPath ACS Command Reference Guide
Authentication
57