Cyclades AlterPath ACS Command Reference Manual page 308

Profile Configuration
Parameter
all.issue
all.prompt
all.media
all.netmask
all.mtu
all.mru
all.sysutmp
Description
This text determines the format of the login banner that
is issued when a connection is made to the ACS . \n
represents a new line and \r represents a carriage return.
Expansion characters can be used here. The default
parameter is:
\r\n\
Welcome to Console Server Management Server
%h port S%p \n\
\r\n
This text defines the format of the login prompt.
Expansion characters can be used here.
It defines media type RS232/RS484 and operation
mode half/full duplex.
Valid values for all products :
•
rs232 - RS232 (default value).
•
rs232_half - RS232 with RTS legacy half duplex
•
rs232_half_cts - RS232 with RTS legacy half
duplex and CTS control
Valid values for the ACS1 only :
•
rs485_half - RS485 half duplex with out
terminator
•
rs485_half_terminator - RS485 half duplex with
terminator
•
rs485_full_terminator - RS485 full duplex with
terminator
•
rs422 - alike rs485_full_terminator
Note: This parameter is inactive by default. To activate,
uncomment the parameter and set the desired value.
It defines the network mask for the serial port.
It defines the maximum transmit unit
It defines the maximum receive unit
It defines whether portslave must write login records.
Valid values are yes or no.
Table 8.1: /etc/portslave/pslave.conf common parameters
Factory Configuration
See Description column
%h login:
rs232
255.255.255.255
1500
1500
1
292