Rear Panel; Hardware Installation - Planet GSW-601S User Manual

2.2 Rear Panel

The rear panel of the Switch indicates a AC inlet power
socket, which accepts input power from 100 to 240VAC,
50-60Hz. And a RS-232 console port for setting up the
switch via a connection to a terminal or PC using a terminal
emulation program.
Power Notice:
1. The device is a power-required device, it means, it will
not work till it is powered. If your networks should active
all the time, please consider using UPS (Uninterrupted
Power Supply) for your device. It will prevent you from
network data loss or network downtime.
2. In some area, installing a surge suppression device may
also help to protect your switch from being damaged by
unregulated surge or current to the Switch or the power
adapter.

2.3 Hardware Installation

2.3.1 Connecting end node or hub or switch
1. Place the Switch on a smooth surface or fasten the
mounting brackets with the provided screws in a
standard 19" rack.
2. Connect switch or PC to one port of the Switch using
Category 3/4/5 UTP/STP cabling.
3. Connect another switch or PC to the other port of
Switch by following the same process as described in
Step3.
Notice:
Cable distance for Switch
The cable distance between Ethernet Switch and hub/PC
should not exceed 100 meter for UTP/STP cable, 220m
for 62.5/125 fiber cable and 500m for 50/125 fiber cable.
GSW-601S User's Manual
13