4.4 Auto-Negotiation
The
STP
ports
"Auto-negotiation". This technology automatically sets the
best possible bandwidth when a connection is established
with another network device (usually at Power On or
Reset). This is done by detect the modes and speeds at
the second of both device is connected and capable of,
Both 10Base-T and 100Base-TX devices can connect with
the port in either Half- or Full-Duplex mode. 1000Base-T
and 1000Base-SX can only connected in Full-duplex
mode.
GSW-601S User's Manual
on
the
Switch
have
built-in
31