Siemens SIMATIC ET 200SP HA Manual page 52

Drivers, parameters, diagnostics messages and address space
A.3 Parameter assignment and structure of the module and channel parameters
Temperature coefficient
LG‑Ni 0.005
Cu 0.00427
Limits for hardware interrupts
The following tables contain the permitted limits for hardware interrupts (in each case, the
usable value is given). The limits depend on the selected measurement type and the selected
measuring range. The value for the overflow must be larger than the value for the underflow.
Table A-4
Resistor
(all possible measuring range settings)
32510
1
Table A-5
Thermocouple
°C
20699
-1199
Table A-6
Thermocouple
°C
20189
-1699
Table A-7
Thermocouple
°C
5399
-2699
52
Limits for resistor and voltage
Limits for thermocouple types B, C, and E
Type B
°F K °C
32765 23431 24999
-1839 1533 -1199
Limits for thermocouple types R, S, J, and L
Types R, S
°F K °C
32765 22921 14499
-2739 1033 -2099
Limits for thermocouple types T, K, and U
Type T
°F K °C
10039 8131 16219
-4539 33 -2699
Analog input module AI 16xTC/8xRTD 2-/3-/4-wire HA (6DL1134-6JH00-0PH1)
Code
0000 1010
0000 1100
Voltage
32510
-32511
Type C
°F K °C
32765 27731 11999
-1839 1533 -2699
Type J
°F K °C
26419 17231 11499
-3459 633 -1999
Type K
°F K °C
29515 18951 8499
-4539 33 -1999
Overflow
Underflow
Type E
°F K
21919 14731 Overflow
-4539 33 Underflow
Type L
°F K
21019 14231 Overflow
-3279 733 Underflow
Type U
°F K
15619 11231 Overflow
-3279 733 Underflow
Manual, 05/2017, A5E39408175-AA