Display Openflow Instance - HP 5900 series Command Reference Manual

Byte count
packet count
watch port
watch group
Output interface
Referenced information
Count
Flow table
Flow entry

display openflow instance

Use display openflow instance to display the detailed information for an OpenFlow instance.
Syntax
display openflow instance [ instance-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id: Specifies an OpenFlow instance by its ID in the range of 1 to 4094.
Examples
# Display the detailed information of OpenFlow instances.
<Sysname> display openflow instance
Instance 10 verbose information:
Configuration information:
Description
Active status : active
Inactive configuration:
Classification VLAN, total VLANs(1)
3
Flow table:
Table ID(type): 0(MAC-IP)
Table ID(type): 1(Extensibility)
Active configuration:
Classification VLAN, loosen mode, total VLANs(1)
Number of bytes processed by the action bucket. Two hyphens (--) are
displayed when the field is not supported.
Number of packets processed by the action bucket. Two hyphens (--) are
displayed when the field is not supported.
Ports that affect the action bucket status.
Group table IDs of the ports that affect the action bucket status.
Output interface in the group table.
Information about the flow entries referencing group entries.
Number of flow entries that reference group entries.
ID of the flow table to which the flow entries referencing the group entries
belong.
IDs of flow entries referencing group entries.
: test-desc
13