Field
Controller id IP address: port:
Failopen mode
display openflow meter
Use display openflow meter to display meter entry information for an OpenFlow instance.
Syntax
display openflow instance instance-id meter [ meter-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id: Specifies an OpenFlow instance by its ID in the range of 1 to 4094.
meter-id: Specifies a meter by its ID in the range of 0 to 4294901760. If no meter ID is specified, this
command displays information about all meter entries for an OpenFlow instance.
Examples
# Display meter entry information for OpenFlow instance 100.
<Sysname> display openflow instance 100 meter
Meter flags: KBPS
Instance 100 meter table information:
meter entry count: 2
Meter entry 100 information:
Meter flags: KBPS
Band 1 information
Type: drop, rate: 1024, burst size: 65536
Byte count: --, packet count: --
Referencedinformation:
Count: 3
Flow table: 0
Description
Brief information of controllers which have established connections to the
OpenFlow instance. This field is displayed only when the OpenFlow instance
has established connections to controllers.
Connection interruption mode when the OpenFlow instance is disconnected
from all controllers (this field is displayed only when the OpenFlow instance is
disconnected from all controllers):
•
secure—The OpenFlow switch uses flow tables for traffic forwarding after it
is disconnected from all controllers.
•
standalone—The OpenFlow switch uses the normal forwarding process
after it is disconnected from all controllers.
-- Rate value in kb/s, PKTPS -- Rate value in packet/sec
BURST -- Do burst size,
STATS -- Collect statistics
15