Controller Address - HP 5900 series Command Reference Manual

Predefined user roles
network-admin
Parameters
vlan-id: Specifies the VLAN ID in the range of 1 to 4094.
vlan-mask: Specifies a VLAN mask in the range of 0 to 4095. The default value is 4095.
loosen: Specifies the loosen mode for the OpenFlow instance-VLAN association. If the loosen mode is
used, a port belongs to the OpenFlow instance when VLANs associated with the OpenFlow instance
overlap with the port's allowed VLANs. Otherwise, a port belongs to an OpenFlow instance only when
VLANs associated with the OpenFlow instance are within the port's allowed VLAN list.
Usage guidelines
The system calculates the VLANs to be associated according to the specified VLAN ID and mask. To view
the associated VLANs, use the display openflow instance command.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Associate an OpenFlow instance with a list of VLANs determined by VLAN ID 255 and VLAN mask 7.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] classification vlan 255 mask 7
Related commands
display openflow instance

controller address

Use controller address to specify a controller for an OpenFlow switch and configure the main connection
to the controller.
Use undo controller address to remove the configuration.
Syntax
controller controller-id address { ip ip-address | ipv6 ipv6-address } [ port port-number ] [ ssl
ssl-policy-name ] [ vrf vrf-name ]
undo controller controller-id address
Default
The main connection is not configured for an OpenFlow instance.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
Controller-id: Specifies a controller ID in the range of 0 to 63.
ip ip-address: Specifies the IPv4 address of the controller.
ipv6 ipv6-address: Specifies the IPv6 address of the controller.
2