HP 5900 series Command Reference Manual page 11

Syntax
display openflow instance instance-id flow-table [ table-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id: Specifies an OpenFlow instance ID in the range of 1 to 4094.
table-id: Specifies a flow table ID in the range of 0 to 254.
Usage guidelines
If you do not specify the flow table ID, the command displays information about all flow tables for the
specified OpenFlow instance.
Examples
# Display information about all flow tables for OpenFlow instance 10.
<Sysname> display openflow instance 10 flow-table
Instance 10 flow table information:
Table 0 information:
Table type: MAC-IP, flow entry count: 1, total flow entry count: 2
MissRule (default) Flow entry information:
cookie: 0x0, priority: 0, hard time: 0, idle time: 0, flags: reset_counts
|no_pkt_counts|no_byte_counts, byte count: --, packet count: --
Match information: any
Instruction information:
Write actions:
Drop
Flow entry 1 information:
cookie: 0x0, priority: 1, hard time: 0, idle time: 0, flags: none,
byte count: --, packet count: --
Match information:
Ethernet destination MAC address: 0000-0000-0001
Ethernet destination MAC address mask: ffff-ffff-ffff
VLAN ID: 100, mask: 0xfff
Instruction information:
Write actions:
Output interface: XGE1/0/4
Write metadata/mask: 0x0000000000000001/0xffffffffffffffff
Goto table: 1
Table 1 information:
Table type: Extensibility, flow entry count: 2, total flow entry count: 2
8