Mac-Ip Dynamic-Mac Aware - HP 5900 series Command Reference Manual

Use undo in-band management vlan to restore the default.
Syntax
in-band management vlan vlan-list
undo in-band management vlan
Default
No inband management VLAN is configured.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
vlan-list: Specifies a list of VLANs in the format of vlan-list = { vlan-id1 [ to vlan-id2 ] }&<1- 1 0>, where
vlan-id1 and vlan-id2 are both in the range of 1 to 4094, vlan-id2 cannot be smaller than vlan-id1, and
&<1- 1 0> indicates that you can specify up to 10 vlan-id1 [ to vlan-id2 ] parameters.
Usage guidelines
The inband management VLANs must be a subset of the VLANs associated with the OpenFlow instance.
Examples
# Configure VLAN 10 as an inband management VLAN in OpenFlow instance 1.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] in-band management vlan 10

mac-ip dynamic-mac aware

Use mac-ip dynamic-mac aware to configure an OpenFlow instance to support dynamic MAC
addresses.
Use undo mac-ip dynamic-mac aware to restore the default.
Syntax
mac-ip dynamic-mac aware
undo mac-ip dynamic-mac aware
Default
An OpenFlow instance ignores dynamic MAC address messages sent from controllers.
Views
OpenFlow instance view
Predefined user roles
network-admin
Usage guidelines
This command configures an OpenFlow instance to support querying and deleting dynamic MAC
addresses in only MAC-IP flow tables.
20