Table of Contents
Advertisement
TG2130_2132.book Page 14 Tuesday, July 11, 2006 11:06 AM
Making/Answering Calls
Making calls
1
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2
Press {C}.
3
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L If an alarm tone sounds in step 2, move
closer to the base unit or place the
handset on the base unit, and try again.
L If additional dialing is necessary after
using speed dialing functions such as
phonebook dialing or REDIAL, wait until
speed dialing is finished to continue
further dialing. Otherwise, the unit may
not dial properly.
If noise interferes with the conversation
Press {CH} to select a clearer channel
while talking or move closer to the base
unit.
To redial after confirming the last
number dialed
Press {REDIAL}, then press {C}.
To select the receiver volume
Press {V} or {^} repeatedly while talking.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
14
For assistance, please visit http://www.panasonic.com/phonehelp
For example, if you need to dial the line
access number "9" when making outside
calls with a PBX:
1
{9} i {PAUSE} i Dial the phone
number.
2
{C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press {C}.
L You can also answer the call by
pressing any button except {OFF}
and {#}. (Any key talk feature)
2
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L You can change the ringer tone
(page 12).
Advertisement
Table of Contents
