Programming - Panasonic KX-TG2130 Operating Instructions Manual

2.4 ghz cordless answering system with two handsets
Hide thumbs Also See for KX-TG2130:
Table of Contents

Advertisement

TG2130_2132.book Page 12 Tuesday, July 11, 2006 11:06 AM

Programming

Programmable settings
You can customize the unit by
programming the following features using
the handset.
Display language
You can select English, Spanish, or French
as the display language. The default
setting is "ENGLISH".
1
Press {FUNCTION} 2 times until
"LANGUAGE" is displayed.
2
Select "ENG", "ESP", or "FRA" by using
{V} or {^}.
3
Press {EDIT}, then press {OFF}.
Voice guidance language
You can select either "ENGLISH" or
"Español" as the voice guidance
language. The default setting is
"ENGLISH".
To change the voice guidance language,
press and hold {SKIP} for 2 seconds.
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"TONE": For tone dial service.
"PULSE": For rotary pulse dial service.
1
Press {FUNCTION} 6 times until "DIAL
MODE" is displayed.
2
Select "TONE" or "PULSE" by using {V}
or {^}.
3
Press {EDIT}, then press {OFF}.
12
For assistance, please visit http://www.panasonic.com/phonehelp
Date and time
Set the correct date and time. When you
play back a message from the answering
system (page 21), the unit announces the
day and time it was recorded.
1
Press and hold {DAY/CHECK} until the
current day is announced, then release
{DAY/CHECK}.
2
Press and hold {HOUR} until the
current hour is announced, then release
{HOUR}.
3
Press and hold {MIN} until the current
minute is announced, then release
{MIN}.
Handset ringer on/off
You can turn the ringer on/off. The default
setting is "ON".
1
Press {FUNCTION} 5 times until
"RINGER" is displayed.
2
Select "ON" or "OFF" by using {V} or {^}.
3
Press {EDIT}, then press {OFF}.
Note:
L When the ringer is set to off, the handset
does not ring for outside calls.
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 ringer tones. The default setting is
"RINGER TONE 1".
1
Press {FUNCTION} 4 times until
"RINGER TONE" is displayed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg2132

Table of Contents