Display-Based Controls - Yamaha genos Owner's Manual

Display-based Controls

The display of this instrument is a special touch screen that allows you to select or change the desired parameter by sim-
ply touching the corresponding setting on the display. You can also decrease/increase the value in small steps by rotating
the Data dial or pressing the [DEC]/[INC] button.
Using the display (touch screen)
NOTICE
Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display.
NOTE
Keep in mind that operation by simultaneously touching two or more points on the display is not possible.
 Touch
To select an item, lightly touch the corresponding indication on the display.
 Slide
Hold down the display slider, then slide your finger vertically or horizontally to change the parameter value.
 Rotate
Touch and hold the display knob, and rotate your finger around the knob to change the parameter value.
 Touch and hold
This instruction means to touch the object in the display and hold it for a while.
When setting values by using the []/[] buttons, a slider or a knob, you can restore the default value by touching and
holding the value on the display.
34
Genos Owner's Manual
NOTE
If you find the system sounds (produced
when touching the display) distracting,
you can turn them on/off from
[MENU]  [Utility]  [Display/Touch
Screen]  Touch Screen [Sound]