Display-Based Controls - Yamaha CVP-709 Owner's Manual

Display-based Controls

The display of this instrument is a special touch screen that allows you to select or change the desired
parameter by simply touching the corresponding setting on the display.
Data dial
Display [HOME] button
Using the Display (Touch Screen)
NOTICE
Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display.
NOTE
Keep in mind that operation by simultaneously touching two or more points on the display is not possible.
 Touch
To select an item, lightly touch the corresponding indication on
the display.
NOTE
You can turn on/off system sounds produced when touching the display from
[Menu]  [Utility]  [Display/Touch Screen]  Touch Screen [Sound]
 Slide
Hold down the display slider, then slide your finger vertically or
horizontally to change the parameter value.
Slide your finger vertically or horizontally on the display to turn
pages, or to show or hide some part of a particular display.
CVP-709/CVP-705 Owner's Manual 29