Audio Quick Recording - Yamaha genos Owner's Manual

2
Start recording.
You can start recording by playing the keyboard, starting the Style, playing a Multi
Pad or touching [Play/Pause].
3
After you finish your performance, touch [Stop] to stop record-
ing.
4
Touch [Save] to call up the Song Selection display, then save
the recorded performance as a file (page 37).

Audio Quick Recording

Before recording, make the necessary settings such as Voice/Style selection and the microphone connection (if you want
to record your singing).
1
Call up the Audio Quick Recording display via [RECORDING] 
Audio [Quick Recording].
The display appears and a new empty audio file is created, with record standby
status enabled. However, unlike MIDI Quick Recording, recording does not start
automatically with keyboard performance, Style playback, or Multi pad playback.
2
Before recording, check the recording levels on the Rec Moni-
tor meter by playing the keyboard, Style, etc., and adjust them
accordingly by using the corresponding slider.
Adjust the control so that the volume doesn't constantly go into the "red" and light
up the indicator.
3
Touch [Play/Pause] to start recording.
Immediately after this operation, start and record your performance.
4
After you finish performance, touch [Stop] to stop recording.
Recorded data is automatically saved to User drive as a file with the name auto-
matically set. The recorded Audio Song appears in the User category on the Song
Selection display.
NOTICE
The recorded Song will be lost if
you close the display or you turn
the power off without executing
the save operation.
NOTE
To cancel the recording, touch [Stop] on
the display, and then press the [EXIT]
button, before going on to step 2.
2
Genos Owner's Manual
6
91