Saving And Recalling Custom Panel Setups With Registration Memory - Yamaha genos Owner's Manual

Saving and Recalling Custom Panel Setups with Registration Memory

Registering Your Panel Setups
1
Make the desired panel Settings, such as those for Voices,
Styles and Effects.
2
Press the [MEMORY] button in the REGISTRATION MEMORY
section to call up the Registration Memory window.
Selecting the items to be registered
The Registration Memory window contains the list for selecting the items to
be registered. Before going on to step 3, enter or remove checkmarks by
touching the desired items. Items having checkmarks will be registered.
3
Press the desired REGISTRATION MEMORY [1]–[10] button to
which you wish to memorize the panel setup.
The memorized button lights in red, which indicates that the button contains data
and its number is selected.
About the lamp status
• Red: Data registered and currently selected
• Blue: Data registered but not currently selected
• Off: No data registered
4
Register various panel setups to other buttons by repeating
steps 1–3.
The registered panel setup can be recalled by simply pressing the desired number
button.
The list of items to be registered to
Registration Memory
NOTICE
If you selected a button whose
lamp is lit in red or blue here, the
panel setup previously memo-
rized to the button will be erased
and replaced by the new settings.
NOTE
The panel setups registered in the num-
bered buttons are maintained even when
you turn off the power. If you want to
delete all ten current panel setups, turn
the power on while holding the F# 6 key
(second right-most key) on the key-
board.
Genos Owner's Manual
7
93