Setting Up Keyboard Parts - Yamaha genos Owner's Manual

Setting up Keyboard Parts

There are four keyboard parts for your manual performance: LEFT, RIGHT 1, RIGHT 2 and RIGHT 3, and each part has
one Voice. You can combine these parts by using the PART ON/OFF buttons to create luscious instrument textures and
convenient performance combinations.
Creating combinations of keyboard parts (Layer, Split)
 To play one single Voice over the entire keyboard:
Turn on the RIGHT 1, 2 or 3 part. Make sure the LEFT part is turned off.
 To play two or three different Voices simultaneously (Layer):
Turn on two or more parts from RIGHT 1, 2 and 3.
 To play different Voices in the right- and left-hand sections of the keyboard (Split):
Turn on the LEFT part and at least one of the RIGHT 1–3 parts. The F#2 and lower keys are used for the LEFT part while
the upper keys (excluding F#2) are used for the RIGHT 1, 2 and 3 parts. The key which divides the keyboard into the left-
hand and right-hand sections is referred to as the "Split Point."
Turning each keyboard part on/off from the display
You can also turn parts on/off via the Home display, or the Voice Part Setup display. For details, see "Home Display"
(page 30), or "Voice Part Setup Display" (Reference Manual on the web site).
48
Genos Owner's Manual
LEFT part
Left-hand (LOWER) section
Split Point (F#2 by default)
For calling up the Voice Selection display
of each part
For turning on/off the keyboard parts
Right-hand (UPPER) section
RIGHT 3 part
RIGHT 2 part
RIGHT 1 part