Outputs Tab: Add, Delete, Identify Displays, And Archive - PRG MBOX User Manual

Outputs Tab: Add, Delete, Identify Displays, and Archive
At the bottom of the Outputs tab there are four buttons that perform actions to assist in output setup.
Add
Clicking the Add button reveals a menu with four options. If no output is selected in the pane above, then only two of
the options - "Add One Output" and "Add Matrix of Outputs..." - will be available. If an output is selected, then two
additional options - "Add One Sub-Output to ###" and "Add Matrix of Sub-Outputs to ###..." - will be available, with the
"###" being replaced by the index of the selected output.
+ Add One Output - a single output will be added and placed onto the global surface. The output will be placed in
the top-left corner of the global surface, given a size of 1920x1080, and given an index number based on the lowest
unused output index number.
+ Add Matrix of Outputs - two or more outputs will be added and placed onto the global surface. Selecting this
option will open the matrix configuration window. In this window, the properties of the matrix can be set - number of
horizontal and vertical outputs, width and height of the outputs, horizontal and vertical overlap, and window group.
The matrix of outputs will be placed at the top-left corner of the global surface and the outputs will be given index
numbers in sequence based on the lowest unused output index number.
+ Add One Sub-Output - a single sub-output will be added and placed onto the selected output. The sub-output
will be placed in the top-left corner of the global surface, given a size equal to the output's size, and given an index
number based on the lowest unused output index number,
+ Add Matrix of Sub-Outputs - two or more sub-outputs will be added and placed onto the selected output. Selecting
this option will open the matrix configuration window. In this window, the properties of the matrix can be set -
number of horizontal and vertical sub-outputs, width and height of the sub-outputs, horizontal and vertical overlap,
and window group. The matrix of sub-outputs will be placed at the top-left corner of the output and the sub-outputs
will be given index numbers in sequence based on the lowest unused output index number.
Delete
Clicking on the Delete button will immediately delete the selected output or sub-output, leaving the next consecutive
output selected if one exists.
Note: The Outputs tab user interface includes undo and redo functionality using standard keyboard shortcuts: [
undo and [⌘ ⇧ Z] for redo.
MBOX® USER MANUAL
62
⌘Z] for