Licensing Mbox Software - PRG MBOX User Manual

Licensing Mbox Software

CAUTION! Always install the Mbox software before attempting to license!
Hardware USB License Key (Dongle)
When the Mbox software is installed, the installer will provide the option to install the USB license key drivers as well.
If a USB license key isn't being used, the drivers don't need to be installed. If a USB license key is purchased at a
later time, then the drivers can be downloaded and installed from the link on the previous page. Once the drivers are
installed, Mbox will recognize the license key.
If the Mbox application fails to recognize the USB key at any point after the drivers are installed, please contact PRG for
assistance.
Soft-license (eSellerate) - Mbox Studio and Mini only
If a soft-license for Mbox Studio or Mini was purchased online, then a receipt and an email with a serial number will have
been sent. The serial number will start with the characters "PRGMBS-" for Mbox Studio or "PRGMBM-" for Mbox Mini.
To license an installation of Mbox, connect the computer to the internet and launch the Mbox application. Then click
on the License Operations pop-up in the License area of the Preferences tab and select "Activate License" to enter the
serial number.
A soft-license can be purchased directly through the licensing portal built into the Mbox application. Click on the
License Operations pop-up in the License area of the Preferences tab and select "Purchase License" to be taken to
the purchasing portal. Once the purchasing process completes successfully, the Mbox software will be automatically
licensed. An email receipt with the serial number will be sent and should be saved as a record of the serial number in
case the computer needs to be relicensed at a later date.
MBOX® USER MANUAL
22