WANHAO DUPLICATOR I3 MINI Instruction Manual page 11

INTRODUCTION
Here is an example of how size,infi ll,and resolution can affect printing time:
Dimensions:
Infi ll:
Resolution:
Print Time:
Filament Used:
3D Printed Object
Once the printer has completed all of the layers, you will have a 3D Printed Object. The
results are certainly worth it, with 3D models ranging from simple to complex.
support material.
Setup WANHAO 3D Printer
It's important to check your printer before every print.We've included
some steps on page 21 in section 4.2 Good 3D Printing Practices
for you to quickly refer to each time.
3D Printing Process
Now that you've loaded a GCODE file onto the printer,it will
commence heating up the Extruder, then start printing. While
printing, the nozzle will move along the X and Y acis as each layer is
printed. This can take some time,depending on the size of the 3D
model, print speed of the 3D printer and resolution of each layer.
62.5 x 25.75 x 67.75mm
20%
2mm
53min
4m
70 x 70 x 140mm
0%
20%
2mm
2mm
39min 6hr 40min
2.54m 45m
20%
1mm
13hr 12min
45.67m
11