If you experience any issues with this product, or it’s performance is not what you had expected, please contact us at WANHAO before returning the item to the store. It is likely that we can resolve any problems for you via phone or email.
China laws. In case you purchase from WANHAO distributor, your warranty shall be covered by distributor’s Warranty and honored by WANHAO distributor too.
• Before installation, you should make sure that the WANHAO 3D Printer is unplugged from the power supply. • Only place the printer on a stable flat surface that can safely suppport the WANHAO 3D Printer. • Ensure the mains socket / outlet is near the equipment and is easily accessible.
Page 6
PLA or ABS filament are used to create a 3D object. 1.2 From 3D Design to Printed 3D Object 3D Design Slice to GCODE Setup WANHAO 3D Printer 3D Printing Process 3D Printed Object 3D Design Having a 3D design is the first step to creating a 3D Object.
Page 7
3D Printed Object Once the printer has completed all of the layers, you will have a 3D Printed Object. The results are certainly worth it, with 3D models ranging from simple to complex. CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
PRODUCT ASSEMBLY & INITIAL SETUP Unboxing and Assembly Your WANHAO D10 3D Printer is carefully packed to avoid damage in transit. Take your time unpacking it. The printer is preassembled and requires minimal set up before powering on. D10 quick started guide and first printing: https://www.youtube.com/watch?v=HK2KlqBjC-s&t=27s...
Enlish and French Calibrate the screen Filament Change Heats the extruder to target temperature Once preheated, tap to Load filament by 10mm increments Once preheated, tap to Unload filament by 10mm increments CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Page 14
Banner Apple Select the file to print Progress indicator Change settings on the fly Monkey Deer Adjust / change filament on Orange the fly Banner Pause or Continue printing Apple Stop the print CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Page 15
QUICK START GUIDE : supporting foam Unpack your WANHAO D10 and Set up your WANHAO D10 as its accessories. demonstrated in the photo and remove the supporting foam from beneath the printing platform. PTEE Tube PTEE Tube Insert Insert Plug in...
Page 16
Press “Filament” memory card. Insert the Memory Card “Load” on the touchscreen. After into the printer and select your Print. preheating a few minutes Filament will begin extruding from the nozzle. CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Page 17
Congratulations, you have started your first print! Important: We highly recommend adding a RAFT support to all of your 3D files to increase the print success rate. CURA has built in functionality to automatically generate a raft for you. CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
5. After the installation you will see the D10-robot positioned in the Cura interface. In case you did not select the machine type. Please go to Machine—Wanhao-D10 to select the correct machine. NOTE: We keep on updating our software, so the latest version that you have downloaded might be a newer version than the one in this manual.
4. Menu bar 8. Rotate model Printer options In this bar you can change to Full settings, preferences and Option to change the rotation more expert settings of the object you like to print CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Page 20
5. Load the .STL file into Cura and prepare it for print on your D10 3D Printer. Tip: If you’ve made a 3D design yourself, you can contribute back to the YouMagine community! CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
6. Wait for the file to save to the Memory Card. Once completed a save notification will appear. 8. Before removing the Memory Card / USB Reader always select eject button in Cura. CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Pause print: Pauses the print once the current GCODE instruction has completed (be patient as the full layer may require printing per GCODE file). Tap Resume to keep printing Stop print: Stops the current print CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Carefully remove 3D Object. Never use Scraper towards your body. Keep Scraper evenly flat when scraping to avoid damage to the Heated Print Bed. Damaged Heated Print Beds/ mats may affect adhesion for future prints Store 3D printer in a clean, dry environment CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
FILAMENT Filament The WANHAO Duplicator 10 is designed to be only used with PLA (Polylactic Acid BioPlastic) fialment. Only use genuine WANHAO filaments as using generic filaments may damage your 3D printer and may void your warranty. Extra filament including multiple colours and PLA types are availabe from the online store at https://www.aliexpress.com/store/120824...
A GCODE file provides the essential temperature settings and movement information for your WANHAO D10. A number of 'Slicer' software programs exist which convert a 3D model file into a series of 3D printable layers. Cura is free open source slicer software released on the AGPLv3 license.
Adding the Duplicator 10 to Cura On first launch Cura will ask you to add a 3D printer from the list provided. Select the Wanhao D10 to automatically add the D10 profile. Alternatively, you can add a 3D printer by selecting...
Servicing your Duplicator 10 Replacing the print mat The Duplicator 10 print surface is durable and easy to clean. Should you require a replacement, additional print surfaces are available for purchase from www.wanhao.store Lift the old print mat from the print bed...
X Axis and Y Axis rods. Nuts and Bolts Loose nuts and bolts could affert the geometry of the Duplicator 10. Check that all nuts and bolts remain firmly tightened. If required, retighten using the hex wrench.
Gradually increase the sandpaper grit until the 3D print is smooth TIP: Spraying a primer filler also help to reduce the layer lines on the 3D object. This can then be sanded away and repeated, until the desired smoothness is achieved CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
The maintenance of Duplicator 10 should be conducted by skilled person only. Always unplug the printer before doing maintenance or modifications. In order to have a smoothly working Duplicator 10 it is important to maintain it correctly. Please follow the safety / deterioration checks during maintenance:...
Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area. CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
3D Printer and potentially void your warranty. What types of filament can my 3D Printer Print? The WANHAO D10 3D Printer accepts PLA and PLA specialty filaments such as wood, flexible, luminous and conductive. For our full range of filaments visit https://www.aliexpress.com/store/120824...
DC motors that move in discrete steps. This allows for precise positioning and/or speed control .stl / STL A common file format for 3D Designs/Models USB Cable This cable allows communication between the WANHAO 3D Printer and a computer, using the USB port of the computer CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com...
TROUBLESHOOTING Troubleshooting If have any trouble using the Duplicator 10, please refer to the troubleshooting guide below, or call customer support on +86-571-23290996 You can also visit https://www.wanhao3dprinter.com for support videos and advanced tutorials Printing Problems Clicking sound from one of the stepper motors One of your stepper motors may not be connected properly.
SD Card not shown / files not appearing • Please ensure your SD Card is 32GB or less • Please ensure your SD Card is formatted as FAT32 • Reseat the SD card and try again CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10...
Please be assured, refurbished parts or replacements are only used where they meet WANHAO’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.
Page 37
CUSTOMER SUPPORT +86-571-23290996 support@wanhao3dprinter.com Model: Duplicator 10 REV1.2...