Plug-In In Id-000-Format; Description - Vectron HW 90196 User Manual

Vectron

8. Plug-in in ID-000-format

8.1 Description

fig. 14: Plug-in
The Plug-in in ID-000-format (e.g. dealer card) contains the key to withdraw money from customer smart
cards of corresponding payment systems. That for, if the HW 90196 is intended to accept smart cards
etc., a relevant plug-in for the payment system has to be inserted in the corresponding slot.
If the dealer card is sent in „oversize format", take out the punched card part (plug-in) carefully.
The HW 90196 can take in 2 plug-ins. The corresponding slots are on the bottom side of the HW 90196
on the board which you will see after having removed the accu block.
Plug-in Payment system
←
↑
fig. 2: Assignment of plug-ins
12-pole system
interface
(hidden)
fig. 15: HW 90196 with plug-ins
© Höft & Wessel AG
Subject to amendment, errors excepted
User manual
Smart card
Reserved
label
HW90195UserMan.doc
Plug-in-slot for
smart card
1.0 02.02.2001 Lin
accu contacts
Reset-key
page 52/70