Table of Contents
Advertisement
7.1 Technical data
7.1.1 Hardware
Casing:
Dimensions:
Weight:
Connection network:
Processor:
Storage:
Interfaces:
Interfaces internal:
LED indication:
Radio module:
Power failure safety:
Power supply:
7.1.2 Software
Operating system:
Programming:
Protocol ethernet:
Protocol to radio module: LAP-Protokoll.
Lin
page 49/70
User manual
Plastic injection moulded casing, suitable for mounting on wall and ceiling;
casing rear side: aluminium plate.
L 157 mm, W 200 mm, H 61 mm.
Ca. 835 g.
1 Twisted Pair Ethernet (10base-T).
486, 386-compatible for PC-104-Board, 66 MHz.
•
Working storage: 8 MB DRAM;
•
Data storage: 1 MB SRAM as Plug-on-Board, optional 2 MB, 3 MB,
4 MB (component layouts).
•
1 LPT interface (parallel), SUB-D 25-pole;
•
4 connections with RJ-45-sockets(10-pole, serial);
optional 6 connections with RJ-45-sockets;
•
1 serial terminal-port interface, connection with RJ-45 (8-pole);
•
1 3-pole connection socket for power supply with power supply unit
HW 1210.
1 internal interfaces for radio module
LED1: indication ready for operation;
LED2: active network link;
LED3: active communication;
8 additional free programmable LEDs.
Radio module HW 86020: integrated in casing.
Wire antenna λ/4, omnidirectional, integrated in casing.
Antenna
Frequency
2.03 – 2.480 GHz
range
Communication According to FCC part 15;
Uses frequency hopping;
Propritary protocol;
channels: max. 4 per each Radio module, 3 for the termi-
nal and 1 for printer.
Radio data rate 24 kbps.
Range
In obstacle-free open areas upto 300 m, less in buildings,
depending on conditions.
Connections
Serial 3,3 V interface, incl. status lines.
Power supply
Via terminal unit.
Battery-buffered SRAM-board for data storage during power failure
With power supply unit HW 1204 (see chap. 7.2). Available for 120 V.
Linux
In C oder C++.
TCP/IP.
02.02.2001
1.00
HW90195UserMan.doc
Vectron
© Höft & Wessel AG
Subject to amendment, errors excepted
Advertisement
Table of Contents
