System-Info-Display - Vectron HW 90196 User Manual

5.1.1 System-info-display

320
SSSSSSSS----NNNNNNNN
EEEE-XXXX-YYYY-VV.VV
FLASH:nn RRRR DDDD
BOOTLDR: BBBBB
TT.MM.JJ HH:MM
SSSSSSSS
NNNNNNNN
EEEE
XXXX
YYYY
VV.VV
nn
RRRR
DDDD
BBBBB
TT.MM.JJJJ HH:MM
If the MDE is inserted in the communication station HW 50196, system-info-display (320) is followed by a
presentation of the EPROM-No. of the communication station.
321
KOM-Station
H&W EPROMNR=XXXXX
TT.MM.JJJJ
page 23/70
Lin
User manual
8
= Customer-specific start set
= Serial number of the HW 90196 (identical with number indicated on type plate)
= Customer-specific EPROM-No. (Höft & Wessel internal).
= Size of working storage (hex).
= Storage capacity of RAM-Disk (hex).
= Version-No. of the operating system
= Number of Flash-Chips.
= Storage capacity (Flash) (hex) for the system
= Storage capacity of Flash-Disk (hex).
= Customer-specific Bootloader-No. (Höft & Wessel internal).
= Date/time on system watch
02.02.2001 1.00
300 (back to system menu)
HW90195UserMan.doc
Vectron
© Höft & Wessel AG
Subject to amendment, errors excepted