Table of Contents
Advertisement
Vectron
Read/Write unit for
smart cards:
Interfaces:
Temperature range:
Humidity:
Auxiliary equipment:
3.2 Software
Power management:
Configuration possi-
bilities:
Bootstrap loader:
© Höft & Wessel AG
Subject to amendment, errors excepted
User manual
•
Plug-in reader in accordance with ISO 7816, FCI 7312 E 0225 S01, SMD
(at top of device).
•
2 plug-in places for 2 dealer cards in ID-000 format (under accu block).
Infrared interface,Type S-IR, 115 kBit/s, to base station (lower edge);
Internal hidden12-pole contact pads
Working temperature 0° to +40°C;
Storager temperature -20° to +60° C.
Up to 95 % (not condensing).
Programmable acoustic beeper.
Reset key in accu casing.
For optimal use of power resources with automatic cutoff function, warning
indication in case off low charged accumulator and emergency stop trigger in
case of slow or abrupt fall of minimum power supply voltage.
Time to switch to sleep mode for electronical system and radio module.
Display lighting time, beepmode keyclick on/off, malfunction beep on/off.
BIOS via IR interface loadable.
HW90195UserMan.doc
1.0
02.02.2001
Lin
page 14/70
Advertisement
Table of Contents
