Table of Contents
Advertisement
Settings contain the following parameters:
Save Config
Click on the "mlrd.cfg" hyperlink to save the current configuration into local computer.
This configuration file can be used for debugging purpose as well as cloning settings to
all other devices.
Restore Config
Select the proper configuration to be restored. Press the "Browse" button to select the
correct file to be restored. After this, Press the "Upload" button to upload the selected file.
This action will override current configuration. Please use with caution.
Install New Webserver Certificate
Select the proper certificate to be uploaded to the internal web server. Failing to do so
may cause the web server to stop running. Always use a tested web server certificate for
this purpose.
Access Control
From WAN Interface
Check or uncheck the checkbox to allow or ban access for configuration purposes from
WAN interface.
From VPN Interface
Check or uncheck the checkbox to allow or ban access for configuration purposes from
VPN interface.
From Network
Check or uncheck the checkbox to allow or ban access for configuration purposes from
Network.
Subnet
Allow this network address for configuration access.
Netmask
Network mask for the subnet configured above.
"Save Config" button
27
Advertisement
Table of Contents
