Technical Parameters - Denkovi DAEnetIP2 User Manual

2. Technical parameters

Parameter
Power supply voltage
CPU power supply (output level
3.3VDC)
Relay channels count
Digital I/O count (0-3.3V, when output
- max current is 1mA)
Analog inputs count
Digital inputs count
LM35DZ sensor inputs count
Inputs (0-10VDC) count
LED (Link, Activity,
Power On)
Save I/O states
DHCP
Network parameters
MAC lock (protection)
SNMPv1
Read-Write Community String
Read-Only Community String
SNMP traps
SNMP I/O access commands
Web server for configuration/access
TFTP client for remote firmware
update
Command for TFTP update
(Web,SNMP)
Enable/Disable TFTP update
1) Digital inputs are the analog inputs, but the input voltage is software converted to 1 or 0
2) This port (JP1) is connected to the analog inputs port of DAEnetIP2
3) This port (JP3) is connected to the analog inputs port of DAEnetIP2 (note it is possible to use only
one pin of analog input port of DAEnetIP2 at a time - either LM35DZ sensor pin either 0-10V pin).
Otherwise the analog input port may be damaged.
Size
1)
2)
3)
DAEnetIP2 Eight Relay Module LM35DZ User Manual
Table 1. Technical parameters
Value
122mm x 825mm
12 VDC or 24 VDC
8 (10bit ADC, Vref=1.2VDC - external
source)
IP/Mask/Default gateway
Yes (snmpget,snmpset)
21 Aug 2017
3.3V
8
8
8
8
8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-4-