Table of Contents
Advertisement
E-mail can be sent from the Startup script (
connection. The command email is can be used with the following parameters:
-t
receiver's E-mail address
-s
subject (has to be in quotation marks)
-m
message (has to be in quotation marks)
-a
attachment file
-r number of attempts to send email (default 2 attempts set)
Attention!
Commands and parameters can be entered only in lowercase. Example of sending an e-
mail:
email –t name@domain.com –s "subject" –m "message" –a c:\directory\abc.doc –r 5
AT TENT I ON
This command sends e-mail to address
message
"
" and attachment "abc.doc" right from the directory c:\directory\ and attempts to send 5 times.
5.19 SMS Configuration
SMS configuration can be invoked by
fined in various events and states of the router. Sending of SMS can be configured in the first part of the
window:
Item
Send SMS on power up
Send SMS on connect to
mobile network
Send SMS on disconnect to
mobile network
Send SMS when datalimit
exceeded
Send SMS when binary input
on I/O port (BIN0) is active
Add timestamp to SMS
Phone Number 1
Phone Number 2
Phone Number 3
Unit ID
BIN0 – SMS
In the second part of the window it is possible to set function
bling it is possible to control the router by SMS message.
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
Example of the SMTP client configuration
Startup Script
name@domain.com
SMS
item in the
Description
Automatic sending of SMS messages after power up.
Automatic sending SMS message after connection to mobile net-
work.
Automatic sending SMS message after disconnection to mobile net-
work.
Automatic sending SMS message after datalimit exceeded.
Automatic sending SMS message after binary input on I/O port (BIN0)
is active. Text of message is intended parameter BIN0.
Adds time stamp to sent SMS messages. This stamp has a fixed for-
mat YYYY-MM-DD hh:mm:ss.
Telephone numbers for sending automatically generated SMS.
Telephone numbers for sending automatically generated SMS.
Telephone numbers for sending automatically generated SMS.
The name of the router that will be sent in an SMS.
SMS text message
Send SMS configuration
Contents of Package
Configuration section
item in the
with the subject "subject", body message
Configuration section
. Sending of SMS can be de-
Enable remote control via SMS
) or via SSH
. After ena-
64
Advertisement
Table of Contents
