Backup Routes - Wieland wienet v3 User Manual

Contents of Package
5.7

Backup Routes

Using the configuration form on the Backup Routes page can be set backing up primary connection by
other connections to internet/mobile network. For each back up connection can be defined a priority.
Own switching is done based on set priorities and state of the connection (for Primary LAN and Second-
ary LAN).
Enable backup routes switching
If option is checked, the default route is selected according to the set-
Enable backup routes
tings below. Namely according to status of enabling each of backup route (i.e.
switching for Mobile WAN, Enable backup routes switching for PPPoE, Enable backup routes switching
for WiFi STA, Enable backup routes switching for Primary LAN or Enable backup routes switching for
Secondary LAN
), according to explicitly set priorities and according to status of connection check (if it is
enabled). In addition, network interfaces belonging to individual backup routes have checked a flag RUN-
NING. This check fixes for example disconnecting of an ethernet cable.
Attention!
If you want to use connection to mobile WAN as one of the backup routes, it is neces-
sary to enable Check Connection at Mobile WAN configuration to enable + bind option,
AT TENT I ON
see chapter 4.3.1.
39 Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016