Table of Contents
Advertisement
5.4
PPPoE Configuration
To enter the PPPoE configuration select the
selected, the router tries to establish PPPoE connection after switching-on. PPPoE (Point-to-Point over
Ethernet) is a network protocol, which PPP frames encapsulating to the Ethernet frames. PPPoE client to
connect devices that support PPPoE bridge or a server (typically ADSL router). After connecting the
router obtains the IP address of the device to which it is connected. All communications from the device
behind the PPPoE server is forwarded to industrial router.
Item
Username
Password
Authentication
MRU
MTU
N OT E
Note!
If setting bad packet size value (MRU, MTU), the transmission can be unsuccessful.
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
PPPoE
menu item. If the
Description
Username for secure access to PPPoE
Password for secure access to PPPoE
Authentication protocol in GSM network
• PAP or CHAP – authentication method is chosen by router
• PAP – it is used PAP authentication method
• CHAP – it is used CHAP authentication method
Maximum Receiving Unit – It is the identifier of the maximum size of
packet, which is possible to recese in given environment. Default value
is set to 1492 bytes. Other settings may cause incorrect data transmis-
sion.
Maximum Transmission Unit – It is the identifier of the maximum size
of packet, which is possible to transfer in given environment. Default
value is set to 1492 bytes. Other settings may cause incorrect data
transmission.
Contents of Package
Create PPPoE connection
option is
34
Advertisement
Table of Contents
