Table of Contents
Advertisement
Contents of Package
5.3.6
PPPoE Bridge Mode Configuration
Enable PPPoE bridge mode
If the
option selected, it activate the PPPoE bridge protocol PPPoE (point-to-
point over ethernet) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside
Ethernet frames. Allows you to create a PPPoE connection from the device behind router. For example
from PC which is connected to ETH port router. The IP address of the SIM card will be alloted to PC.
Apply
The changes in settings will apply after pressing the
button.
Mobile WAN configuration
Wieland Electric GmbH | BA001039 (Rev. A) | 08/2016
32
Advertisement
Table of Contents
