Appendix B: Troubleshooting - TP-Link Archer MR200 User Manual

Appendix B:
Troubleshooting
T1. How do I restore my router's configuration to its factory default
settings?
With the router powered on, press and hold the WPS/RESET button on the rear panel
until the Power LED starts flashing.
Note: Once the router is reset, the current configuration settings will be lost and you will need to re-configure the
router.
T2. What can I do if I forget my password?
Web Management page password:
Restore the router to its factory default settings and then create a new password using
1-15 characters.
Wireless Network password:
1. The default Wireless Password/PIN is printed on the product label of the router.
2. If the default wireless password has been changed, log into the router's web
management page and go to
T3. What can I do if I cannot log into the router's web management page?
• Make sure the router connects to the computer correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as "Obtain an IP address
automatically" and "Obtain DNS server address automatically".
• Make sure the default access you input is right.
• Check your computer's settings:
1 ) Go to
2 ) Click
3 ) Click Connections, select
Downloaded from www.Manualslib.com
Start > Control Panel
status and tasks;
Internet Options on the bottom left;
manuals search engine
Basic > Wireless to retrieve or reset your password.
> Network and Internet, and click
Never dial a connection;
View network
80